NeuroTrac Rehab - Integrated Combined TENS and STIM Unit VAT Free

Neurotrac Rehab Specifications (TENS & STIM)

1. Dual channel: individually isolated circuits.

2. Amplitude: 0-90 mA into 500 Ohm load ; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.

3. Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts.

4. Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.

5. Selectable pulse width: 50 ìS - 450 ìS [2% accuracy].

6. Pulse Rate selection: in the continuous mode 2 – 200 Hz [2% accuracy].

7. Mode: Continuous, Burst or Modulated.

8. Burst mode: Bursts of 9 pulses [200 ìS] at 150 Hz or 185 Hz, over 2 seconds.

9. Modulation mode: 6-second cycle of concurrent width modulation and pulse repetition rate modulation. TENS 7: Width starting at50 ìS and increasing exponentially to 250ìS in three seconds and then returning back to 50 ìS in the next three seconds. Rate starting 20 Hz, increasing exponentially to 85 Hz and then returning to 100 Hz. TENS 8: Width fixed at 200 ìS. Rate starting 32 Hz, increasing exponentially to 100 Hz over 3 seconds and then returning to 32 Hz in the next 3 seconds.

10. Time duration of the custom programmes selectable: 1 minute to 12 hours.

11. Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.

12. If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.

13. Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.

14. Physical dimensions: 108 x 62 x 23 mm.

15. Weight: 0.07KG without battery, 0.1KG with battery.

16. Environmental Conditions for use: +10 to +30 degrees Centigrade. 0-90% Humidity.

17. Environmental conditions for storage & transport:-10 to +50 degrees Centigrade. 0-90% Humidity.

Remotely triggered stimulation can be successfully implemented by people suffering with dropfoot, stroke, problems with upper and lower trapezius and other conditions related to mobility and walking.

Features and Benefits of NeuroTrac Rehab:

Digital Dual Channel TENS with remotely hand controlled STIM

8 Tens programmes

2 customisable Tens programmes

4 triggered STIM programmes

4 conventional STIM programmes

1 customisable remote and conventional programme

Ability to lock the unit

Monitoring of 'time in use' and average current

Clear LCD display

Extended battery life (constant current)

Rate 2 Hz - 200 Hz

Pulse width 50 µS to 450 µS

Automatic switch off after 4 minutes of non-use

User friendly and easy to use

Compact, light and reliable

NeuroTrac Rehab Treatment Applications:

1. arthritis, rheumatoid arthritis and osteoarthritis

2. post operative pain and phantom limb pain

3. musculoskeletal pain, lumbago and sciatica

4. sports injury, whiplash and neck pain

5. neuralgia, headache and tooth ache

6. chronic pain and cancer pain

7. joint pain, foot pain, leg pain, knee pain, back pain and shoulder pain

8. period pain and abdominal pain